No DramaBuyer guide · Packaging
Everything passes through the spout: its bore limits how fast product goes in and its cap decides whether the capping head seals, so a demonstration on water with one cap proves little.
01
Output scales with filling heads, not frame size: in the listings checked, about 17 to 20 pouches a minute per head at both two and six heads. Ask for the per-head rate on your product.
Servo piston for thick products and pieces, magnetic pump for thin liquids. Ask for accuracy measured on your product.
Holders and capping chucks fit one spout bore and one cap. Get the list of other change parts in the quotation.
Juices and purees are often filled hot, which loads seals, pump and pouch. One listing offered CIP only as an option.
02
Send these with the enquiry. Without them, any number a factory gives you is a guess dressed as a quotation.
03
| Require this | A pass looks like |
|---|---|
| Fill a counted batch of your product into your pouches and weigh each one. | Every fill sits inside the contract tolerance. |
| Torque-test caps on a sample, then squeeze pouches upside down. | Torque inside the cap supplier's range, no leak at spout or cap. |
| Run briefly with the cap chute emptied. | Every uncapped pouch is detected and rejected. |
04
05
A doypack filling machine.
A liquid filling machine with a capper.
06
We name the kind of source, how many and when, and never the factory. Listed prices are asking prices, not landed cost. Where we do not hold a fact we say so: that is a GAP, not an estimate.
07
Every machine we source in this area is on the Packaging page. How a project runs, stage by stage, is on how it works, and what it costs is on pricing.
Straight answers
The one whose head count gives your output at the per-head rate proved on your product, with change parts for every spout and cap.
The principles match. Compare pump, torque control and change-part cost; a used European machine fits if its spout tooling matches.
Weighed fills, cap torque, the inverted leak test, the missing-cap reject, guards and emergency stops.
Buying direct, you are the importer: check the Declaration of Conformity and technical file exist, and put your name on the machine or its papers.
Contact
Send a machine, a quotation you want checked, or a question. We reply with what we would look at first.
Sent
A person reads every message. You will hear back within one working day.
Not sent
Please email info@nodramachina.com directly and we will pick it up from there.