Industrial sourcing · China to Europe

Buyer-firstOpen route · visible proof

Buyer guide · Metal & CNC

Fiber laser cutting machine from China

Two quotes for a 3015 fiber laser at the same wattage can differ several times over, and the listing will not tell you which laser source, cutting head or frame is inside the price.

Ask about this machine ↗Where the numbers come from

Written and listings checked 30 September 2026. Every figure on this page names its source.

What you are actually comparing.

Two quotes, one machine name

What hides inside the price

Laser source make, and who repairs it

The most expensive single part. Listings offer two or three source makes under one price. Write make, model and power into the contract, and ask who holds the source warranty, the builder or the source maker.

Cutting head and its consumables

Autofocus or manual, and the head maker. Ask where protective windows, nozzles and ceramic rings are stocked in Europe. They wear weekly, and courier parts from China stop a machine for days.

Frame and stress relief

Ask the frame weight, whether it was stress relieved after welding, and whether the gantry is cast aluminium or welded steel. A light frame reaches brochure speed on straight lines and loses accuracy on small holes.

Drives, rack and guide rails

Servo and reducer makes per axis, rack grade and guide maker. Accuracy claims rest here. Ask which standard the positioning figure was measured to, over what travel.

Open bed or enclosure with exchange table

An open single table exposes people to scattered Class 4 radiation. A full enclosure with wavelength-rated windows and an exchange table costs more and lets you load while cutting.

Chiller, extraction and assist gas

Is the chiller sized for the fitted source, is the extractor included, and is the machine set up for nitrogen, oxygen or air? The nitrogen supply or high-pressure compressor is rarely in the quote.

Nesting software licence

A full licence in your name, how many seats, and who pays for updates or a replacement dongle after warranty.

Decode the model code.

The four digits on most flatbed fiber lasers give the working area in hundreds of millimetres. 1530 and 3015 are the same bed in a different order. Power is stated separately, and letter suffixes are each builder's own series marks.

3015 = 3,000 x 1,500 mm = 4.5 square metres.
4020 = 4,000 x 2,000 mm = 8 square metres, 1.8 times the 3015.
6025 = 6,000 x 2,500 mm = 15 square metres, over three times the 3015.

Before you ask for a price.

Send these with the enquiry. Without them, any number a factory gives you is a guess dressed as a quotation.

Every material you cut, with grade, thickness and share of hours. The thickest job sets the power; the most common job sets the payback.
The sheet size your steel supplier delivers, which fixes the bed code.
The edge each part needs: oxide edge, clean nitrogen edge for welding or paint, or burr-free for visible parts.
Whether you also cut tube, and the longest length.
Your gas plan: bulk nitrogen, cylinders or a high-pressure compressor.
Mains supply, room for chiller and extractor, and the extract route outside.
Whether your insurer or workplace rules require a full enclosure.

Turn the claim into a demonstration.

Require this	A pass looks like
Cut your own sheets to your drawing, including holes with diameter equal to thickness and a slot pattern, on your thickest and most common material, filmed without cuts.	Every hole and slot measures inside the contract tolerance, holes are round, and bottom dross is absent or removable by hand, as agreed beforehand.
Photograph source and head nameplates and read running hours from the source controller.	Make, model and power match the contract, and source hours are close to zero on a new machine.
Cut a large square with a hole at each corner across the full bed, then measure diagonals and hole positions.	Diagonals and hole centres agree within the contract positioning figure, measured by your inspector with calibrated tools.

The documents that must arrive with it.

EU Declaration of Conformity naming 2006/42/EC, or Regulation (EU) 2023/1230 for delivery from 20 January 2027, plus 2014/35/EU and 2014/30/EU, with model and serial number.
The laser class of the complete machine under EN 60825-1, the machine safety standards applied such as EN ISO 11553-1, and the risk assessment.
Manual in the language of use, electrical diagrams, and source, chiller and extractor manuals.
Software licence in the buyer's name, controller backup and the cutting parameter library.
Warranty terms separating frame, source and head, with who repairs each.

The one people forget. The source maker's serial number and warranty registration in your name. Without it, a source failure in month ten becomes a dispute between you, the builder and the source maker while the machine stands idle.

When this is the wrong machine.

Buy something else if

Named, not hedged

Most of your parts start as tube, profile or pipe in long lengths.

A tube laser cutting machine with chucks and a loading rack. A flat bed with a rotary add-on suits occasional tube only.

Your work is mostly thick carbon plate with bevelled weld preparation, and edge finish is secondary.

A CNC plasma cutting machine with a bevel head. It costs less to buy and run on thick plate.

You cut wood, acrylic or textiles as often as metal.

A CO2 laser, whose wavelength suits organic materials.

Where the numbers come from.

We name the kind of source, how many and when, and never the factory. Listed prices are asking prices, not landed cost. Where we do not hold a fact we say so: that is a GAP, not an estimate.

Listings · 49Forty-nine marketplace listings for 3015 fiber laser cutting machines, checked September 2026, advertised asking prices from US$4,000 to US$100,000 per unit. In 25 of the 49, the title named more than one laser power under one price or price range. These are asking prices, not landed cost.
Listings · 3Three detailed listings for a 3015 frame at 3,000 W, checked September 2026, gave single-set asking prices from US$12,000 to US$15,000. Each offered two or three source makes. Stated positioning accuracy was 0.05, 0.02 and 0.01 mm, and one page gave conflicting figures in two tables. Warranties ran from one to three years.
Listings · 3The same three listings gave maximum thickness at 3,000 W as up to 12 mm with no material named, as both 10 mm and up to 22 mm on one page, and as depending on material. None tied it to edge quality or gas.
Arithmetic3015 = 3,000 x 1,500 mm = 4.5 square metres; 4020 = 8 square metres; 6025 = 15 square metres.
GAPGAP - no supplier quotations logged for this machine yet. Three to five quotations for one configuration, for example an enclosed 3015 with a named 3,000 W source, would give a real price spread.
GAPGAP - we have not measured cut samples from any of these machines. One supplied drawing cut by three factories would test the accuracy claims.

Related machines.

Tube laser cutting machine. Choose the tube laser cutting machine when most of your parts start as tube or profile rather than flat sheet.
CNC plasma cutting machine. Choose the CNC plasma cutting machine when thick carbon plate and bevel cuts dominate and edge finish matters less than cost.

Every machine we source in this area is on the Metal & CNC page. How a project runs, stage by stage, is on how it works, and what it costs is on pricing.

Straight answers

Questions buyers ask about this machine.

Chinese vs European fiber laser cutting machine: what is the difference?+

The process is the same, and many Chinese frames carry sources and heads from the same makers as European ones. The differences are frame stiffness, drives, software and service travel time. A used European machine with a service history can be the better buy if local service exists.

What goes on a fiber laser cutting machine inspection checklist?+

Source, head, servo and chiller nameplates against the contract, source hours, your sample cuts measured, the full-bed diagonal test, interlocks and emergency stops, and the licence in your name.

What CE documentation does a fiber laser cutting machine need?+

An EU Declaration of Conformity for this serial number, the technical file behind it, a stated laser class for the whole machine and a manual in your language. A brochure CE mark proves nothing. Ask for the declaration before any deposit.

Who is the EU importer of a fiber laser cutting machine?+

Buying directly from a Chinese seller normally makes you the importer. Your name and address go on the machine or its documents, and you check the conformity documents exist and match it. Delivery after 19 January 2027 falls under Regulation (EU) 2023/1230.

What does a fiber laser cutting machine factory audit check?+

Whether the factory welds and stress relieves its own frames, assembles and tests in house, holds source and head stock, and can cut your materials.

Contact

Tell us what you need.

Send a machine, a quotation you want checked, or a question. We reply with what we would look at first.