Industrial sourcing · China to Europe

Buyer-firstOpen route · visible proof

Buyer guide · Construction

Tile adhesive production line from China

Tile adhesive performance comes from additives dosed in small percentages, and a line sold on tonnes an hour can still weigh them too coarsely to pass an adhesion test.

Ask about this machine ↗Where the numbers come from

Written and listings checked 1 October 2026. Every figure on this page names its source.

What you are actually comparing.

Two quotes, one machine name

What hides inside the price

Additive weighing

Cement and sand are weighed in hundreds of kilograms; cellulose ether and redispersible polymer powder in a few kilograms per batch. Ask for a separate small scale for additives, its resolution, and whether dosing is manual or automatic.

Mixer principle

Plough shear mixers with side choppers break up fibres and lumps of polymer powder; ribbon mixers are cheaper and gentler. Ask which is quoted and the mixing time per batch.

Grey and white switching

White adhesive picks up grey traces from residue in the mixer and bins. Ask how the mixer empties, how it is cleaned between colours, and whether separate hoppers are offered.

Valve bag packer

Most adhesive leaves in valve bags. Packers range from air float to impeller and screw types. Ask the bag weight accuracy and the dust capture at the spout.

Sand input

Most small lines assume dry, graded sand bought in. Check the quote does not assume a dryer you do not have.

Before you ask for a price.

Send these with the enquiry. Without them, any number a factory gives you is a guess dressed as a quotation.

Your recipes by class under EN 12004-1, such as C1 or C2 with optional extras, and the additive shares in each.
Tonnes per shift and the number of recipes you switch between in a day.
Grey only, or grey and white.
Bag size and type, and whether you want a palletiser.
Whether you already buy dry sand or need drying.

Turn the claim into a demonstration.

Require this	A pass looks like
Mix three batches of your C2 recipe with a tracer additive and sample each at five points.	Tracer share at every point inside the spread set before the run.
Fill 50 bags and weigh every one.	All bags inside the weight tolerance in the contract.
Send bagged adhesive to a laboratory for tensile adhesion tests under EN 12004-2.	Results meet the class printed on your bag.

The documents that must arrive with it.

EU Declaration of Conformity under 2006/42/EC, or Regulation (EU) 2023/1230 from 20 January 2027, plus 2014/35/EU and 2014/30/EU.
Scale calibration certificates for the main and additive scales.
Dust extraction and filter data for the mixer and packer.

The one people forget. The additive scale certificate. Your factory production control has to show additive dosing is accurate, and a line without a traceable small scale leaves you unable to prove it.

When this is the wrong machine.

Buy something else if

Named, not hedged

You mainly need masonry mortar, render or screed in large tonnages from wet sand.

A full dry mortar production line with a sand dryer and silos.

You want to sell a few pallets a month under your own brand.

Toll blending by an existing producer until volume justifies a line.

Where the numbers come from.

We name the kind of source, how many and when, and never the factory. Listed prices are asking prices, not landed cost. Where we do not hold a fact we say so: that is a GAP, not an estimate.

Listings · 12Twelve listings for tile adhesive mixing lines with a stated capacity, checked October 2026, advertised from US$1,000 to US$140,000 per set. A 3 tonne an hour line was listed at the top and a 25 to 30 tonne line near the bottom, so price follows scope, not capacity. These are asking prices, not landed cost.
ArithmeticEach 0.1 per cent of additive in a 1,000 kg batch is 1,000 x 0.001 = 1 kg; a 2 per cent share is 20 kg.
Listings · 10Ten valve bag packer listings, checked October 2026, advertised from US$1,800 to US$38,000 per set.
GAPGAP - no supplier quotations logged for this machine yet. Three to five quotations for one configuration would give a real price spread.

Related machines.

Dry mortar production line. Choose a dry mortar line if your volumes are large and your sand arrives wet.
Concrete batching plant. Choose a batching plant if your product is wet concrete delivered by truck.

Every machine we source in this area is on the Construction page. How a project runs, stage by stage, is on how it works, and what it costs is on pricing.

Straight answers

Questions buyers ask about this machine.

What is the best tile adhesive production line from China for a start-up?+

A small line with a plough shear mixer, a separate additive scale and a valve packer, sized to your recipe count rather than peak tonnage.

Is there a tile adhesive production line sourcing guide for comparing quotes?+

Put the same scope in every request: additive scale, mixer type, packer and dust filters. Listed prices do not follow capacity, so scope is the only fair basis.

What CE documentation does a tile adhesive production line need?+

A machinery declaration for the line. Your adhesive needs its own declaration of performance to EN 12004-1, backed by your factory production control.

How do I import a tile adhesive production line to the EU?+

You become the importer when you buy directly, so your name goes on the line or its documents and you check the declaration fits.

Contact

Tell us what you need.

Send a machine, a quotation you want checked, or a question. We reply with what we would look at first.