Industrial sourcing · China to Europe

Buyer-firstOpen route · visible proof

Buyer guide · Construction

Roof tile making machine from China

Search for a roof tile making machine and most offers are metal sheet roll formers, and among the concrete tile machines the real limit is often the number of pallets the tiles cure on, not the press.

Ask about this machine ↗Where the numbers come from

Written and listings checked 1 October 2026. Every figure on this page names its source.

What you are actually comparing.

Two quotes, one machine name

What hides inside the price

Concrete tile or metal sheet

Many listings under this name form steel sheet that only looks like tiles. Confirm the machine forms cement and sand tiles before reading any other figure.

Extrusion or hydraulic press

Roller extrusion machines push a continuous ribbon of mortar under a roller and slipper and cut it into tiles. Hydraulic presses form one tile at a time with no vibration. Ask which, and see tiles from it.

Pallet count and material

Each tile is formed on its own shaped pallet and stays there until it can be handled. Ask how many pallets are included and their material, since they limit daily output.

Profiles and fittings

Every tile profile, and each ridge, verge or eave fitting, needs its own mould and pallet set. Ask the price per profile.

Colour and coating

Through-coloured mix, a colour slurry or a sealer coat after curing change the equipment list. Ask which the offer assumes.

Decode the model code.

Listed speed is tiles per minute. Multiply by minutes in a shift for a ceiling, then compare it with the shift output the same listing claims.

4 tiles a minute x 60 x 8 hours = 1,920 tiles a shift
7 tiles a minute x 60 x 8 hours = 3,360 tiles a shift, below a claimed 4,000
With 2,000 pallets and tiles held on them until the next day, output stops at 2,000 a day whatever the press speed

Before you ask for a price.

Send these with the enquiry. Without them, any number a factory gives you is a guess dressed as a quotation.

Tile profile, size and weight, plus every fitting you will sell.
The standard: EN 490 for concrete roofing tiles and fittings, with tests under EN 491.
Tiles a day and how long they stay on pallets before handling.
Colour method and any surface coating.
Curing: open air, covered racks or a heated chamber.

Turn the claim into a demonstration.

Require this	A pass looks like
Run your profile with your sand for one counted hour.	Tiles per minute match the offer, with every tile complete at the nibs and interlocks.
Weigh 20 tiles and check their fit on a test roof batten frame.	Weight and interlock fit inside limits agreed before the run.
Send cured tiles to an independent laboratory for EN 491 tests.	Transverse strength, water impermeability and frost results meet what you will declare under EN 490.

The documents that must arrive with it.

EU Declaration of Conformity under 2006/42/EC, or Regulation (EU) 2023/1230 from 20 January 2027, with 2014/35/EU and 2014/30/EU.
Pallet and mould drawings for each profile.
Instructions in the language of use with guarding details.

The one people forget. The pallet drawing. Pallets wear and bend, and without a drawing a local supplier cannot make replacements that fit your moulds.

When this is the wrong machine.

Buy something else if

Named, not hedged

You want metal roofing sheet shaped like tiles.

A roofing roll forming machine, which forms coated steel coil.

Your market wants fired clay tiles.

A clay extrusion and pressing line with a dryer and kiln, declared under EN 1304.

Where the numbers come from.

We name the kind of source, how many and when, and never the factory. Listed prices are asking prices, not landed cost. Where we do not hold a fact we say so: that is a GAP, not an estimate.

Listings · 11Eleven listings under roof tile making machine, checked October 2026: eight were metal roll forming machines and one a concrete tile press.
Listings · 10Ten cement roof tile machine listings, checked October 2026, advertised from US$2,000 to US$40,000 per unit. These are asking prices, not landed cost.
Listings · 2Two listings, checked October 2026, stated speed: a hydraulic press at 4 to 7 tiles a minute, claiming 3,000 to 4,000 a shift with 2,000 pallets, and a roller extruder at 4 to 5 a minute.
GAPGAP - no supplier quotations logged for this machine yet. Three to five quotations for one configuration would give a real price spread.

Related machines.

Roofing roll forming machine. Choose a roll forming machine if your customers want steel roofing sheet rather than concrete tiles.
Terrazzo tile machine. Choose a terrazzo tile machine if you want to press flat floor tiles from a similar cement mix.

Every machine we source in this area is on the Construction page. How a project runs, stage by stage, is on how it works, and what it costs is on pricing.

Straight answers

Questions buyers ask about this machine.

What is the best roof tile making machine from China for concrete tiles?+

One tested on your sand and profile, with enough pallets for a full day and the fittings you need.

Is there a roof tile making machine inspection checklist?+

Pallet flatness, mould wear at the interlocks, roller and slipper condition, a counted run and tiles sent for EN 491 tests.

What does EU compliance mean for a roof tile making machine?+

A machinery declaration covers the machine. The tiles need their own declaration of performance under EN 490.

How do I import a roof tile making machine to the EU?+

Buying directly makes you the importer. Your name goes on the machine or its documents.

Contact

Tell us what you need.

Send a machine, a quotation you want checked, or a question. We reply with what we would look at first.