Industrial sourcing · China to Europe

Buyer-firstOpen route · visible proof

Buyer guide · Construction

EPS panel production line from China

Under the name EPS panel line, listings sell anything from one mould table to a full casting plant for cement panels with a foam core, and the quote rarely says which.

Ask about this machine ↗Where the numbers come from

Written and listings checked 1 October 2026. Every figure on this page names its source.

What you are actually comparing.

Two quotes, one machine name

What hides inside the price

Moulding method

Vertical battery moulds, horizontal tables or an extruder. Each gives a different edge, cure time and floor area.

Mixing and bead dosing

The mix decides density and strength. Ask whether a weighing batcher is included or the operator doses by bucket.

Number of moulds against curing time

Daily output is moulds times castings per day, so few moulds means few panels.

Demoulding and handling

Crane, clamp or hand: this sets the staff count.

Before you ask for a price.

Send these with the enquiry. Without them, any number a factory gives you is a guess dressed as a quotation.

Panel size and tongue and groove profile.
Target density and strength for internal or external walls.
Panels per shift, which sets the mould count.
Test results for your local cement, sand, fly ash and beads.
Crane capacity and space for curing racks.

Turn the claim into a demonstration.

Require this	A pass looks like
Cast a full set of moulds with your mix design and demould the next day.	Every panel inside the dimensions in the offer, with no broken tongue edges.
Send cured panels to an independent laboratory.	Density and strength results match the figures you intend to declare for the product.
Weigh ten batches through the batcher.	Each batch inside the dosing tolerance written in the contract.

The documents that must arrive with it.

EU Declaration of Conformity with the serial number: 2006/42/EC until 19 January 2027, then Regulation (EU) 2023/1230.
Mould drawings with plate thickness.
Instructions in the language of use.

When this is the wrong machine.

Buy something else if

Named, not hedged

Your buyers want metal faced panels for cold rooms, roofs or industrial walls.

A sandwich panel production line, which laminates steel skins to a foam or wool core.

You want solid masonry and your market does not pay for light panels.

An AAC block line or a concrete block machine.

Where the numbers come from.

We name the kind of source, how many and when, and never the factory. Listed prices are asking prices, not landed cost. Where we do not hold a fact we say so: that is a GAP, not an estimate.

Listings · 30Over 30 marketplace listings for EPS cement sandwich wall panel machines, checked October 2026, advertised from US$2,200 to US$250,000 per unit or set. Few stated daily output or panel thickness. Asking prices, not landed cost.
GAPGAP - no supplier quotations logged for this machine yet. Three to five quotations for one configuration would give a real price spread.

Related machines.

Sandwich panel production line. Choose a sandwich panel line when your panels have steel skins, for roofs, cold rooms and sheds.
AAC block production line. Choose an AAC line when your market builds insulating block walls.

Every machine we source in this area is on the Construction page. How a project runs, stage by stage, is on how it works, and what it costs is on pricing.

Straight answers

Questions buyers ask about this machine.

Chinese vs European EPS panel production line: where does the money go?+

Into mould steel, batching, handling and mould count. A European plant usually quotes the whole system; a Chinese listing often quotes one part.

What should an EPS panel production line inspection checklist cover?+

Mould flatness and seals, batcher accuracy, crane load tests and panel dimensions from a real casting.

What CE documentation does an EPS panel production line need?+

A machinery declaration for the line. The line does not make the panels CE marked; foam core cement panels may need a European Technical Assessment. Ask your notified body first.

Who is the EU importer of an EPS panel production line?+

Usually your company, when you buy direct. Your name goes on the machine or its papers, and you check the conformity file.

Contact

Tell us what you need.

Send a machine, a quotation you want checked, or a question. We reply with what we would look at first.