No DramaBuyer guide · Industrial cleaning
An industrial laser cleaning machine is a laser source inside a cell, and most listings sell the source with a hand gun, so the enclosure, the motion system and the fume extraction, which decide whether it can run beside your line, are often missing from the price.
01
An interlocked cell with laser-rated windows lets the complete machine carry a lower class than its source. An open robot needs a laser controlled area around it instead. Ask which the quote is.
Six-axis robot, gantry, or fixed head with parts moving past on a conveyor. Ask the repeatability, how programs are taught, and who writes the first programs for your parts.
Pulsed sources for weld preparation, bonding surfaces and moulds where the base must stay intact; continuous sources for heavy rust where the finish does not matter.
Width cleaned per pass sets cycle time. Curved or uneven parts need height tracking or auto focus to keep the result even.
PLC signals for start, done and fault, part detection, and a recipe per part number. Without them the cell is a manual machine in a box.
Removed oxide, paint and oil leave as fume and dust inside the cell. Ask whether an extractor and filter are included and what they are rated for.
02
Send these with the enquiry. Without them, any number a factory gives you is a guess dressed as a quotation.
03
| Require this | A pass looks like |
|---|---|
| Run your parts through the cell with the saved recipe at your cycle time. | Each cleaned area meets the agreed standard, such as oxide-free under magnification, within cycle time. |
| Open a door or break a light curtain during emission. | Emission stops at once, and restart needs a deliberate reset. |
| Run the number of consecutive parts agreed in the contract. | The last part matches the first, with no position drift or loss of cleaning width. |
04
05
A handheld laser cleaner, or a dry ice blasting machine for moulds cleaned in the press.
An aqueous parts cleaning line or parts washer. Laser removes thin bonded layers; it is a slow way to degrease.
06
We name the kind of source, how many and when, and never the factory. Listed prices are asking prices, not landed cost. Where we do not hold a fact we say so: that is a GAP, not an estimate.
07
Every machine we source in this area is on the Industrial cleaning page. How a project runs, stage by stage, is on how it works, and what it costs is on pricing.
Straight answers
Often the source is from the same makers. The gap is integration, enclosure design, safety documentation and who programs your parts.
Your parts at cycle time, door and light curtain interlocks, source nameplate, machine laser class label, extraction running and PLC signals tested.
A Declaration for the complete machine, the laser standards applied, the machine laser class and a manual in your language.
Normally the buyer placing it on the EU market. Where you connect it to your line yourself, check whether the combined installation needs its own assessment.
Contact
Send a machine, a quotation you want checked, or a question. We reply with what we would look at first.
Sent
A person reads every message. You will hear back within one working day.
Not sent
Please email info@nodramachina.com directly and we will pick it up from there.