Pressure and flow together
Ask both at the gun, then check them against the motor. Pump power in kW is bar times litres per minute divided by 600; a quote whose motor is smaller than that arithmetic has overstated one figure.
No DramaBuyer guide · Industrial cleaning
Industrial pressure washers are sold by bar, but pressure loosens the dirt and flow carries it away, so a high bar figure on a small pump can clean slower than a lower pressure with more water, and the pump behind both figures decides how long the machine lasts.

01
Ask both at the gun, then check them against the motor. Pump power in kW is bar times litres per minute divided by 600; a quote whose motor is smaller than that arithmetic has overstated one figure.
Industrial units use crankshaft plunger pumps, often with ceramic plungers. Light units use axial pumps that wear fast in daily use. Ask the pump maker and its rated speed.
Hot water cuts grease and fat far better. A diesel burner needs fuel, a flue and descaling of the heating coil in hard water; electric heating needs a large supply.
Three-phase electric for indoor and fixed use. Petrol or diesel engines for sites with no power, never in closed halls because of exhaust.
Water jetting machines for castings, tanks and hydrodemolition work at pressures far above wash-bay units, with different safety rules and operator training.
02
Send these with the enquiry. Without them, any number a factory gives you is a guess dressed as a quotation.
03
| Require this | A pass looks like |
|---|---|
| At working pressure, fill a container for one timed minute through the gun. | Measured flow and gauge pressure both match the contract figures. |
| Run the burner for an hour on hot water units. | Outlet temperature reaches the stated value and holds it, with no visible smoke. |
| Release the trigger at full pressure, then inspect hose and fittings. | The unloader sends the pump into bypass or auto-stop, and no fitting leaks. |
04
05
A spray cleaning machine or parts washer, which cleans a whole basket with no operator holding a lance.
A dry ice blasting machine, which leaves no water or blast media behind.
06
We name the kind of source, how many and when, and never the factory. Listed prices are asking prices, not landed cost. Where we do not hold a fact we say so: that is a GAP, not an estimate.
07
Every machine we source in this area is on the Industrial cleaning page. How a project runs, stage by stage, is on how it works, and what it costs is on pricing.
Straight answers
The pump. Many units share frames and burners; plunger pump build and duty rating separate a daily machine from a weekend one.
Timed flow at working pressure, gauge reading, burner outlet temperature, unloader and trigger test, hose ratings and nameplate against contract.
A Declaration of Conformity naming the rules and standards applied, CE marking and a manual in your language. Diesel units also need safe fuel instructions.
The business that brings it onto the EU market, often the buyer. It checks the file and adds its name and address.
Contact
Send a machine, a quotation you want checked, or a question. We reply with what we would look at first.
Sent
A person reads every message. You will hear back within one working day.
Not sent
Please email info@nodramachina.com directly and we will pick it up from there.