Litres per hour of what
Ask for evaporation rate in litres of ethanol per hour at a stated feed concentration. A bare litre figure is not a capacity.
No DramaBuyer guide · Cannabis & hemp
A listing that says 500L may mean a vessel volume or an hourly evaporation rate, and the recovery percentage beside it rarely says how thick the concentrate may get, so quotes that look alike can recover very different amounts.

01
Ask for evaporation rate in litres of ethanol per hour at a stated feed concentration. A bare litre figure is not a capacity.
Single-pass recovery is quoted high, but tubes foul and oil scorches as concentrate thickens, so most units stop early and hand off to a finishing still. Ask the outlet oil concentration.
The evaporator needs a heater and a chiller sized to it. One reseller lists these as options. If they are missing, the system cannot run.
Pneumatic pumps and ATEX (2014/34/EU) certified electrics inside the zone, proven by certificates, not by a listing title.
02
Send these with the enquiry. Without them, any number a factory gives you is a guess dressed as a quotation.
03
| Require this | A pass looks like |
|---|---|
| Run your own tincture for one hour at the quoted feed rate. | Recovered ethanol volume and strength measured, and outlet oil concentration at the contract figure. |
| Stop and clean after the run. | Tubes free of scorched residue on inspection. |
| Vacuum hold test on the empty system. | Pressure rise within the contract limit over the agreed time. |
04
05
A rotary evaporator is simpler and finishes to low ethanol by itself.
Look at the botanical extraction system first.
06
We name the kind of source, how many and when, and never the factory. Listed prices are asking prices, not landed cost. Where we do not hold a fact we say so: that is a GAP, not an estimate.
07
Every machine we source in this area is on the Cannabis & hemp page. How a project runs, stage by stage, is on how it works, and what it costs is on pricing.
Straight answers
Steel columns are similar. Check certified zone electrics, the chiller and heater in scope, and documents. Price the full utility set before comparing.
ATEX plates matched to certificates, pressure test records, a vacuum hold test and a run on your tincture.
Declaration of Conformity, technical file, ATEX and PED papers. As EU importer your name goes on the machine or documents, and solvent rooms need local permits.
Whether you may run this machine, and on what material, depends on the licence your business holds where the machine will be used.
Contact
Send a machine, a quotation you want checked, or a question. We reply with what we would look at first.
Sent
A person reads every message. You will hear back within one working day.
Not sent
Please email info@nodramachina.com directly and we will pick it up from there.