Industrial sourcing · China to Europe

Buyer-firstOpen route · visible proof

Buyer guide · Construction

Wire mesh welding machine from China

A mesh welder is sized by the thickest wire pair it must weld and how wire is fed, and a fence wire machine will not weld reinforcing mesh however it is listed.

Ask about this machine ↗Where the numbers come from

Written and listings checked 1 October 2026. Every figure on this page names its source.

What you are actually comparing.

Two quotes, one machine name

What hides inside the price

Wire diameter range at the weld

Ask the largest line and cross wire it welds together.

Transformers and welding power

Ask transformer count and power. This sets power draw and weld quality.

Wire feed

Pre cut wire or coil fed with straightening. Coil feed costs more and needs fewer workers.

Spacing changes

Ask how long a spacing change takes.

Output form

Panels, rolls, or both, and whether cutting and stacking are included.

Before you ask for a price.

Send these with the enquiry. Without them, any number a factory gives you is a guess dressed as a quotation.

Wire diameters for line and cross wires, and wire grade.
Mesh sizes, spacings and sheet or roll dimensions.
Whether the wire arrives straight cut or on coils.
Output per shift and number of mesh types.
Power supply capacity on site, since welding draws high current.

Turn the claim into a demonstration.

Require this	A pass looks like
Weld your largest wire pair and send sample welds for shear testing.	Weld shear results meet the value your mesh standard asks for.
Change spacing to your second mesh type.	Change done within the time stated in the offer, first sheets in tolerance.
Run one hour at rated speed.	Output and sheet dimensions inside the figures in the offer.

The documents that must arrive with it.

EU Declaration of Conformity with the serial number: 2006/42/EC until 19 January 2027, then Regulation (EU) 2023/1230.
Welding transformer data and the electrical supply needed.
Instructions covering guarding at the welding heads and feed.

The one people forget. The supply connection data. A mesh welder draws heavy welding current, and your grid operator may need figures before connection.

When this is the wrong machine.

Buy something else if

Named, not hedged

You only need chain link or woven fence.

A chain link or weaving machine. Welded mesh is a different product.

You bend and cut loose bar for site work.

A rebar cutting and bending machine pair.

Where the numbers come from.

We name the kind of source, how many and when, and never the factory. Listed prices are asking prices, not landed cost. Where we do not hold a fact we say so: that is a GAP, not an estimate.

Listings · 15About fifteen welded mesh machine listings, checked October 2026, advertised from US$7,500 to US$200,000 per unit. Automatic panel and roll machines at US$19,000 to US$21,500 stated 3 to 8 mm wire; reinforcing lines at US$150,000 to US$200,000 stated 4 to 12 mm. Asking prices, not landed cost.
GAPGAP - no supplier quotations logged for this machine yet. Three to five quotations for one configuration would give a real price spread.

Related machines.

Rebar cutting machine. Choose a rebar cutter when you supply cut bar lengths rather than welded mesh.
Rebar bending machine. Choose a rebar bender when you supply bent bar shapes rather than flat mesh sheets.

Every machine we source in this area is on the Construction page. How a project runs, stage by stage, is on how it works, and what it costs is on pricing.

Straight answers

Questions buyers ask about this machine.

Chinese vs European wire mesh welding machine: which to choose?+

Chinese machines cover most fence mesh work. For reinforcing mesh with declared properties, compare weld control, feed and parts support closely.

What should a wire mesh welding machine inspection checklist cover?+

Weld shear tests on your largest wire, spacing change time, sheet tolerances, guarding and the electrical data.

What CE documentation does a wire mesh welding machine need?+

A Declaration of Conformity with the serial number. Reinforcing mesh you sell also needs certification under the reinforcement rules in your market, often based on EN 10080.

Who is the EU importer of a wire mesh welding machine?+

Usually your company, when you buy direct. Your name goes on the machine or its papers, and you check the conformity file.

Contact

Tell us what you need.

Send a machine, a quotation you want checked, or a question. We reply with what we would look at first.